ppo plastic series
ppo plastic Chinese name is polyphenylene ether, it has the advantages of high rigidity, high heat resistance, flame retardant, high strength and excellent electrical properties, etc. PPO also has the advantages of wear-resistant, non-toxic, pollution-resistant, etc. PPO's dielectric constant and dielectric loss is one of the smallest varieties of engineering plastics, is almost independent of the temperature, humidity. Can be used in the field of low, medium and high frequency electric field (the smaller the dielectric constant, the better the insulation) PPO's load deflection temperature up to 190 ℃ or more, the deformation temperature -170 ℃. Polyphenylene ether, with excellent comprehensive performance.
Affiliated Classification:
ppo plastic
Key words:
Wangpin
Product Description
PPO Series/Polyphenylene
PPO Chinese name is polyphenylene ether, it has the advantages of high rigidity, high heat resistance, flame retardant, high strength and excellent electrical properties, etc. PPO also has the advantages of wear-resistant, non-toxic, pollution-resistant, etc. PPO's dielectric constant and dielectric loss is one of the smallest varieties of engineering plastics, is almost unaffected by temperature, humidity. Can be used in the field of low, medium and high frequency electric field (the smaller the dielectric constant, the better the insulation) PPO's load deflection temperature up to 190 ℃ or more, the deformation temperature -170 ℃. Polyphenylene ether, with excellent comprehensive performance, the most important feature is that under long-term load, has excellent dimensional stability and outstanding electrical insulation, the use of a wide range of temperatures, can be used for a long time in the range of -127 ~ 121 ℃. With excellent water resistance, steam resistance, products with high tensile strength and impact strength, creep resistance is also good, good abrasion resistance and electrical properties.
Modified polyphenylene ether (PPO) white material, through the modification, has an outstanding light-blocking effect, good ink adhesion, chemical resistance and molding of the product after the dimensional stability of the characteristics of the product, is widely used in a variety of digital tubes, dot matrix blocks, shaped displays and other LED products.
Our company produces PPO light-blocking materials commonly used specifications are: LD2100, LD2105, LD2110, LD2120, LD2130, LD2150, applicable to a variety of digital tubes, dot matrix blocks, shaped display and other LED products.
Material application cases:
Properties of PPO（DATA SHEET） average grade
| Thermal properties | Standard | Unit | 540 | HP140 | 731 | SE115 | SE100 |
| Heat distortion temperature | GB/T 1634.1-2004 | ℃(1.80 MPa) | 123 | 140 | 120 | 115 | 100 |
| Mechanical properties | Standard | Unit | Value | Value | Value | Value | Value |
| Notched impact strength | GB/T 1843-2008 | KJ/m2 | 16 | 22 | 16 | 16 | 16 |
| Tensile strength | GB/T 1040.2-2006 | MPa | 58 | 57 | 50 | 58 | 56 |
| Elongation at break | GB/T 1040.2-2006 | % | 18 | 18 | 30 | 20 | 25 |
| Flexural modulus | GB/T 9341-2008 | Mpa | 3000 | 3200 | 3200 | 3000 | 3000 |
| Flexural strength | GB/T 9341-2008 | Mpa | 94 | 76 | 87 | 95 | 90 |
| Rockwell hardness | GB/T 9341-2008 | R | 118 | 120 | 118 | 118 | 118 |
| Rheological properties | Standard | Unit | Value | Value | Value | Value | Value |
| Molding shrinkage (across flow) | GB/T 9341-2008 | % | -- | -- | -- | -- | -- |
| Molding shrinkage (flow) | GB/T 9341-2008 | % | 0.2-0.6 | 0.2-0.6 | 0.2-0.6 | 0.2-0.6 | 0.2-0.6 |
| Melt flow rate | GB/T 9341-2008 | g/10min | 15 | 6 | 7 | 15 | 15 |
| Electrical properties | Standard | Unit | Value | Value | Value | Value | Value |
| Volume resistivity | IEC 62631-3 | Ω.cm | ≥1016 | ≥1016 | ≥1016 | ≥1016 | ≥1016 |
| Surface resistivity | IEC 62631-3 | Ω | ≥1016 | ≥1016 | ≥1016 | ≥1016 | ≥1016 |
| Dielectric strength | IEC 60243-1 | KV/mm | 29 | 29 | 29 | 29 | 29 |
| Comparative tracking index | IEC 60112 | V | -- | -- | -- | -- | -- |
| Flammability properties | Standard | Unit | Value | Value | Value | Value | Value |
| GWFI /Glow-wire flammability index | IEC 60695-2 | ℃ | -- | -- | -- | -- | -- |
| GWIT /Glow-wire ignition temperature | IEC 60695-2 | ℃ | -- | -- | -- | -- | -- |
| Flammability | UL 94 | - | V0 | HB | HB | V0/V1/V2 | V0/V1/V2 |
| Other properties | Standard | Unit | Value | Value | Value | Value | Value |
| Density | GB/T 1033.1-2008 | g/cm3 | 1.08 | 1.08 | 1.10 | 1.08 | 1.08 |
| Water absorption(24h) | GB/T5486.3—2001 | % | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 |
| Referenceprocessing condition | Value | Value | Value | Value | Value | ||
| Drying | -- | -- | 100-110℃ 4-6H | 110-120℃ 4-6H | 100-110℃ 4-6H | 100-110℃ 4-6H | 80-100℃ 4-6H |
| Mold temperature | -- | -- | 60-80℃ | 70-100℃ | 60-80℃ | 60-80℃ | 60-80℃ |
| Recommended processing temperature | -- | -- | 250-300℃ | 280-310℃ | 250-300℃ | 250-290℃ | 240-260℃ |
| Product Characteristics and Application | Flame retardant, heat resistant, electrical properties, excellent water resistance. Used in solar junction boxes and plugs. | High heat resistance, high impact resistance, excellent water resistance. Used in textile yarn tubes | Excellent fatigue resistance, hot water resistance, high dimensional stability for water valves and pump housings. | Excellent balance of physical properties (heat resistance, impact resistance, fluidity), low water absorption. Used in various electric appliance housings | Used in various electric appliance housings | ||
Unless otherwise specified, the above data refers to Dry Application Models (DAM) measured at a relative humidity (RH) = 50% and at 23°C in a laboratory environment. The above data are typical values for reference only and are not guaranteed.
The data above was measured under the laboratory environment of 23℃ and RH=50% for DAM status unless otherwise stated , all is typical data, only for reference, not the permit of quality assurance
Related Products
Message